Question 1

A DP2 pipe-lay vessel's operations manual includes both an ASOG and a WSOG (Well Specific Operations Guideline). A new DPO joining from a construction vessel background is unfamiliar with the WSOG.

What does the WSOG define that the ASOG does not?

Accepted Answer

The WSOG is specific to drilling and well intervention operations — it defines the environmental and equipment limits specifically related to the well and riser system (riser angle limits, disconnect criteria, re-entry criteria), whereas the ASOG covers the vessel's DP position-keeping criteria for the same operation On drilling and well intervention vessels, the ASOG defines the vessel DP position-keeping limits, while the WSOG (Well Specific Operations Guideline) defines limits relating to the well and riser — maximum riser angle, conductor stress limits, disconnect sequence timing, and re-entry criteria after a disconnect. Both documents apply simultaneously and the more restrictive limit governs. The WSOG is set by the well operator; the ASOG is set jointly with the vessel operator. DPOs working on drilling vessels must understand and be able to monitor against both sets of criteria.

Question 2

A trainee DPO asks why the vessel has an Activity Specific Operations Guideline (ASOG) for each job, given that the vessel already has a general DP Operations Manual.

What is the primary purpose of an ASOG, and who is responsible for setting its limits?

Accepted Answer

The ASOG translates general vessel DP capability into specific, agreed criteria for a particular operation and worksite — weather limits, reference system minimums, thruster requirements, and alert zones. It is developed jointly by the vessel operator and the client/installation authority for each specific operation The ASOG (Activity Specific Operations Guideline) is the critical bridge between the vessel's certified DP capability and the specific risks of a particular operation. General capability is not enough — a vessel might be able to hold position in 35 knots open sea, but the same vessel near a fixed structure with a riser connected may need to abort at 20 knots to prevent structural damage. The ASOG sets specific go/no-go limits for that job, agreed between the vessel operator and the client, and defines what combination of failures requires an immediate disconnect or abort. It must be site-specific and operation-specific.

Question 3

During a sensitive DP operation, the lead DPO briefs the incoming watch DPO: "We're currently Green. If we go Yellow, I want to know immediately." A junior watch officer overhears and asks what the Green/Yellow/Red system actually means.

Which statement best describes the ASOG traffic light alert system?

Accepted Answer

Green means operations can continue normally within all ASOG limits; Yellow means a limiting parameter has been reached or a degradation has occurred and the DPO must assess whether to continue — typically with master informed; Red means the abort criteria have been met and operations must stop or disconnect immediately The ASOG traffic light system gives DPOs an immediately understandable status framework. Green = operate normally within all defined limits. Yellow = a defined threshold has been crossed (weather approaching limit, reference system degraded, thruster fault) — the master must be informed, monitoring intensifies, and the DPO must be ready to abort. Red = abort criteria met — operations stop, disconnect sequence initiated. The criteria for each colour are defined in the operation-specific ASOG, not by generic rules. The handover briefing must always include current ASOG status.